FIELDCAM ANALOG & DIGITAL RECORDING SYSTEMS

ANALOG & DIGITAL RECORDING SYSTEMS

Before proceeding to read the descriptions of our various systems, may we suggest that you read our section on Analog versus Digital recording.

Analog vs. Digital Recording

We will carefully analyze your requirements in discussions with you before we recommend either an analog or digital recording system.

L SERIES

ANALOG TIME LAPSE SYSTEMS

The FIELDCAM L Series are color capable high resolution analog VHS / SVHS format both Real Time and true Time Lapse Video and Audio recorders specially modified and integrated by Fuhrman Diversified for various applications including rugged field use. True time lapse systems have equal times between each recorded image that range from 1/60 to 90 seconds but the recorded images can be played back at much shorter intervals for tape review and analysis.

FIELDCAM ANALOG SYSTEMS feature easily deployed integrated closed circuit video and audio recording system which allow recording from 2 up to 640 hours on a single VHS tape cassette. Various camera and microphone systems can be used with the L Series.

Potential applications for these true time lapse recording systems are numerous but they have a number of features in common:

• Temporal(time between images) resolution is sufficient to capture required data in approximately five sequential images without recording too many images for analysis.

• Extended recording times (more than three weeks per tape) if required.

• Single field playback while the tape is stopped for maximum quality (no frame blurring).

• High resolution recording but compatible with many VHS playback decks.

• Time and date display / recording on video image (position adjustable).

• Matrix timer for automatic start / stop over a seven day week

• Low standby current draw

• Externally triggered alarm mode recording

• Real time recording (at 30 frames per second)available on most recorders

• Audio recording (in 2 to 40 hour mode) with microphone option

• Built-in weatherproof 7 in (18 cm) color LCD monitor (WCTLV)option

• External weatherproof control functions (WCTLV) and internal batteries are options

• Complete range of remote camera - MICROCAM™, MIDICAM™, VERSACAM™, etc.

• Recorder to remote camera distances up to 3300 ft. (1000 meters) with coaxial cable

• Low cost per recording station with year to year cumulative quantity discounts available

LDTLV

FIELDCAM LDTLV SONY VHS time lapse recorder with BNC video input and output jacks with appropriate cables. Programmable recording intervals of 1/60, 1/20, 1/12, 0.15, 0.22, and 0.28 seconds. At the above recording intervals, the T 160 tape cassette will last 8, 24, 40, 64, 96 or 126 continuous hours. Audio recording is available in the 8, 24 or 40 hour modes. Alarm input jack allows external trigger to generate 30 frames per second recording. Time, day and date overlay on recorded video image is included.

LSTLV

FIELDCAM LSTLV SONY S-VHS & VHS Time lapse frame recording system allows 2 up to 640 hours to be recorded on a single ST-160 cassette. Recorded resolution with the VERSACAM above is over 430 lines. Recording rate is from approximately 1/60 sec, (Real time recording at 30 frames per second for 2 hours) to 1.4 seconds per frame (640 hours ) and audio (from independent microphones) may be recorded simultaneously in the 2 to 40 hour modes. An eight event daily / weekly timer system allows the system to be programmed for future turn on times and time and date can be overlaid on the recorded image. This recorder is unique in that it allows SVHS quality images to be recorded on high grade VHS tape with a potential media savings of 80%. It also has numerous other features such as a RS232 computer interface jack, high or standard density recording, programmable single shot recording and alarm modes. This is the most versatile analog time lapse recorder available anywhere. Limited quantities available

LRTLV

FIELDCAM LRTLV VHS Real and Time Lapse recorder with BNC video input and output jacks with appropriate cables. Programmable recording intervals of 1/60, 1/20 or 1/12 second. At the above recording intervals, the T 160 tape cassette will last 8, 24 or 40 continuous hours. Audio recording is available in the 8 or 24 hour modes. Alarm input jack allows external trigger to generate 30 frame per second recording. Time, day and date overlay on recorded video image is included.

SPECIFICATIONS

RECORDING TIMES LRTLV LDTLV LSTLV

Per Cassette options (hours) 8, 24 or 40 8,24,40,64,96,126 2 to 640 in 14 steps

Interval between images (sec.) 1/60,1/20, 1/12 1/60, 1/20, 1/12 1/60 to 1.4 in 19 steps

0.15,0.22,0.28 one shot to 180 sec

Audio recording time (hours) 8 or 24 8,24,40 2 to 40 in 5 steps

RESOLUTION & FORMATS

Resolution B&W 350 lines 350 lines 430 lines

Resolution Color 300 lines 300 lines 430 lines

Time lapse recording format field field frame or field

Cassette Type T160 VF/H T160 VF/H T160 VF/H

COMMENTS: High density High density High density or

"Real Action "Real Action" Standard density

ELECTRICAL

Power Requirements are approximate

and vary with camera and illuminator 1.3 amps 1.3 amps 1.7 amps

selected. Nominal 12 to 14 VDC

Number of isolated power input jacks 1 2 2

PHYSICAL (Recorder installed in option O weatherproof overcase)

Height (nominal) 7 in. (43 cm) 7 in. (43 cm) 8 in. (20 cm)

Width (nominal) 10 in. (25 cm) 10 in. (25 cm) 17 in. 43 cm)

Length (nominal) 17 in. (43 cm) 17 in. 43 cm) 22 in. (56 cm)

Weight (nominal) 14 lb. (6.4 kg) 14 lb. (6.4 kg) 29 lb. (13.2 kg)

W SERIES

WCTLV

Weatherproof Cased Time Lapse Video system (for analog and most digital systems)

A transparent weatherproof Lexan faceplate with molded polyurethane frame is attached to the top of the overcase and a 7 inch (18 cm) (diag.) Active Matrix Color Monitor is mounted below the faceplate to allow viewing while the case is sealed shut. Weatherproof switches are fitted to the faceplate to allow recorder control such as power, record, rewind, fast forward, play and access to and control of menu options. The VERSACAM™ series (zoom telemacro remote cameras and VERSACAM™ PTZD/N pan, tilt, zoom, day/night) can also be faceplate controlled . Case is opened only to change tapes or Digital Hard Drive.

ANALOG REAL TIME SYSTEMS

WCMS TYPE 8

The WCMS Type 8 They have an exceptionally broad range of system options and controls with internal or external batteries.

The FIELDCAM WCMS TYPE 8 (Weatherproof Case Monitoring System) is the latest in a series of fully integrated real time recording and monitoring systems with internal batteries housed in a weatherproof overcase. In addition to the broad range of standard features, an extensive range of options allows the FIELDCAM WCMS to be custom adapted to a vast range of various applications. The overcase is opened only to change the tape. Field setup time for a completely weather protected system is less than one minute.

WEATHERPROOF, FLOATING CONTROL, MONITORING AND RECORDING CASE (SIZE 13 x 10 x 6 in. (33x25x15cm); Weight Approx. 19 lb. (8.6 kg) WITH ALL OF THE FOLLOWING:

1. Weatherproof Scratch Resistant Lexan Window Allows Viewing of Flat Tube Monochrome or Color LCD Monitor(size 4 in.(10cm)diag.) Mounted in Lid of Case and Recorder Status Display for Internal Recorder(Camcorder).

2. Weatherproof Booted Pushbutton Switches on Window to Control Record, Stop, Pause, Power and other Functions

3. Weatherproof Booted Toggle Switches on Window for Master Power (Allows Selection of Either Internal or External Battery) Source and to Allow Selective Shutdown of Remote Camera or Monitor to Conserve Battery Power.

4. Miniature 8mm, Digital 8 or MINI DV Recording & Playback Video Cassette Recorder with Record Time up to 5 Hours - LP mode ( 2 1/2 Hours-SP mode) per Tape.

Various SONY Camcorder / Recorder / Playback Decks; Continuous Record Time up to 3 Hours; Color Viewfinder; Image Stabilizer; 16 to 1 Zoom & Macro Lens with Auto Focus; Infrared Remote Control; Full Sony Warranty.

5. Weatherproof O-Ring Sealed Port for Remote Camera Cable System and a Dual Purpose (Recharger or External Power Cable) Jack.

6. Silica Gel Desiccant Can to Protect Electronics from Humidity.

7. Case Mounted Dial Thermometer Indicates Excessive Internal Heat.

8. Maintenance-Free Battery System: 12 Volt, up to 14 Amp Hour to power Remote Camera Recorder and Monitor for up to 10 Hours per Recharge. Supplied complete with computer controlled 3 stage 110 VAC, 60 HZ charger (with charge status indicator lights).

DIGITAL REAL TIME SYSTEMS

WCMS TYPE 9 and TYPE 9R

The WCMS Type 9 is an ultra compact (6 x 9 x 3") weatherproof cased real time video and audio digital recording system with integral 3.5" color monitor and rigid light hood. The internal 40 gig hard drive is capable of recording up to 40 hours at 25 images per second. Internal battery is rated for 2 hours runtime. Longer run time are achievable with either an external battery pack or a larger overcase with more internal batteries. System weight with internal batteries for 24 hour runtimes is approximately 11 pounds. Controls on the weatherproof camera faceplate allow power on/off, record, rewind, play, fast forward without exposing the recorder / monitor system to ambient weather.

The Type 9R has a rotary reel on the front of the case allowing rapid deployment of a camera and infrared illuminator to a distance of 50 feet.

Remember that this system has no time lapse capability and that you will be collecting over 4 million images in each 24 hour period.

WCMS TYPE 10 (FORMERLY MDP TYPE 3)

The WCMS Type 10 is a Miniature Real time Digital 8 or Mini DV recorder with a 4" (diag.) color LCD display in a weatherproof overcase. A case mounted external power supply allows the system to operate off of standard external 12 VDC batteries. The case must be opened to change tapes or program recording. External jacks for power in, video in, composite and S video out. This is the smallest recorder system capable of controlling and recording the output from our VERSACAM™ series cameras. Case size is 6 x 9 x 4 inches when closed

D SERIES

DIGITAL REAL AND TIME LAPSE RECORDING SYSTEMS

FIELDCAM DIGITAL SYSTEMS feature easily deployed, field weatherproofed(as required) integrated closed circuit video and audio recording system which allow recording from days to months (depending on resolution levels, recording rates and hard drive capacity). Virtually all camera and microphone systems can be used with the D Series systems.

The FIELDCAM D Series are color capable high resolution digital format both Real Time and true Time Lapse Video and Audio recorders specially modified and integrated by Fuhrman Diversified for various applications, True time lapse systems have equal times between each recorded image that range from 1/60 to 5 seconds but the recorded images can be played back at much shorter intervals for review and analysis. In addition, digital recorders usually allow a selection of resolution levels ranging from low (which is the equivalent to a VHS field image) to super (which has twice the horizontal resolution of a VHS frame image).

FIELDCAM DHDTLV™ REAL & TIME LAPSE RECORDER AND FIELD CONVERSION OPTIONS

FIELDCAM DHDTLV Digital time lapse recorder with BNC video input and output jacks with appropriate cables. Programmable recording intervals of 1/60, 1/20, 1/10, 1/5, 1, 2 and 5 seconds. Alarm input jack allows external trigger to generate 30 frame per second recording. Time, day and date overlay on recorded video images are standard. Dockable hard drive have a nominal capacities of 80 to 500 GB. Units accept CompactFlash cards and other media for direct downloading selected segments from the hard drive. Networking capability allows remote viewing of live images, images previously recorded while the system continues to record in real time. Various recording parameters can also be changed from remote locations. Many different types of recorders can be configured as DHDTLV systems depending on your requirements and they are too numerous t list with specific features. They also change on almost a day to day basis.

CTD

For a more complete listing of Digital Recording Systems - Special Capabilities see our tutorial.

SDCF SYSTEMS

SDCF systems are all solid state recorders with no moving parts. Images are sequentially collected in memory and when the memory is full or upon command, the images are automatically downloaded to a Compact Flash card. This unique system is appropriate when smaller quantities of images are required ( 1/2 million or so), real time is not required (Temporal Intervals of 30 to 0.2 seconds), low current draw and compact size is important

Many of the Analog and Digital systems listed above have options available to further enhance their capabilities. These features are designated by the letters:

B O Q X D C M G

B Battery power conversion

An internal power supply which allows recorder, remote video camera and infrared illuminators (if required) to operate from external 12 VDC power sources such as deep discharge (marine type) batteries, solar panels, water or wind turbines while retaining all functions of the unmodified recorder. External power inverters (12 VDC to 120 VAC) are not required to operate these fully integrated systems.

O Weatherproof Overcase

The recorder is fitted within a compact weatherproof overcase fitted with appropriate weatherproof remote camera, power input, video / audio output monitoring and remote illuminator power jacks. Hinged lids allow rapid access to the recorder for all function controls. Cases are fitted with permanent high density ethafoam to protect recording deck and other internal components. All cases are vacuum tested for inbound leakage of air and when case is latched shut, it will float in water. Overcase colors are black, yellow or gray. Large overcases are available with new heavy duty ribbed case with mil.- spec. stainless steel drawlatches, integral wheels and handles for ease of transport.

Q or X Quadraxial or ConXall remote camera power supply and cable jack

A waterproof quadraxial port or ConXall jack is fitted to the overcase to supply power out to the remote camera(s) and to carry the video signal back directly into the recorder. Cable runs of up to 330 ft. (100 meters) are possible and this system is compatible with virtually all of our remote cameras.

D Coaxial Driver

Integrated within the FIELDCAM overcase, (as required by customer applications) is an optional power over coaxial cable driver system which allows most remote cameras to operate at distances out to 3300 ft. (1000 meters) with no other external power source. The single coaxial cable is used to both power the remote camera and to bring the video and or audio signal back to the recorder. The latest inter-carrier technology prevents signal degradation, hum and prevents high frequency loss on the extended cable run. This balanced signal is then fed into the regular video monitoring and recording circuits within the recorder. Options include the ability to control our VERSACAM™ and VERSACAM PTZD/N pan , tilt, zoom, day/night dome cameras at these extended distances..

C VITC Vertical Interval Time Code Generator

An inline encoding device that places a unique time code on each frame of the recorded image so that when the tape is played back using Noldus Observer Video Pro software, individual frames may be accessed and analyzed. Not normally required with digital recording systems.

A Multiplexer allows the output from up to 4 to 9 remote cameras to be sequentially recorded onto a single tape (or Digital Hard Drive) at up to 30 frames per second per camera and then to be demultiplexed and played back as a quad image or any single camera from the recording. Real time imaging of any one channel, four channel quad or nine channels simultaneously or sequentially with adjustable dwell times is available. Very high resolution (720 pixels per horizontal line) multiplexers with both field and frame recording are available. Includes power supply for multiplexer and external attachment jacks for multiple remote cameras. Monitor select capability allows output of any camera or group image to be directed to the monitor.

Allows the .GLL sentence portion of the NMEA0183 ASCII output from your GPS system to be displayed onscreen and recorded as video overlay the UTC, Latitude and Longitude along with the video image. Cost includes ASCII decoder for onscreen display of data and programming of the decoder

An on screen programmable 2 lines by 20 characters identification block which can be recorded in real time along with the time, day, date and video camera image. Character height, width, screen position, 8 step gray scale letters and background matte are user selectable. Clock is quartz crystal controlled (to 20 ppm) and has an independent rechargeable backup battery. High Accuracy 5ppm is available

A weatherproof control is faceplate mounted to allow the intensity of either a 6, 12 or 36 LED Illuminator to be varied over approximately a 20 to 1 ratio. This option is available only for remote camera systems using a quadraxial power supply cable and do not require the AUDIO MONITOR CONTROL option. This option is most useful for closeup nocturnal observations (1 to 3 ft (30 to 100 cm) in air; 1 to 6 inches (3 to 15 cm underwater)). This Option is Required for Systems Using the Burrow Probe 3 Remote Camera

A switcher system that allows the video and audio output from one to four cameras to be switched in sequence to the monitor for observation and/or recording. The dwell time per camera is user adjustable between 2 and 20 seconds. The image and sound from any camera can be instantly user switched to the monitor and individual cameras can be locked out of the sequence as required. Cameras extra.

Booted toggle switch on control panel and a second o-ring sealed weatherproof port on the case allows the simultaneous attachment and alternate viewing of two camera systems. Only display camera is powered..

A full array of externally controllable recorder functions in addition to the standard functions of power, record, pause and stop. Additional functions are tape counter reset, data screen, slow playback, frame by frame playback, playback (normal speed), fast rewind and fast forward. Note: During analog slow playback and freeze frame, some noise may be observed on the monitor.

Full color monitor replaces flat tube monochrome monitor. External control of hue, color, dimmer, brightness and audio volume is standard. Supplied complete with Dark Hood Accessory. 7" monitor is standard on WCTLV systems.

A weatherproof volume control, audio jack and headset are provided which allow real time monitoring of sounds picked up by camera mounted microphones or playback of previously recorded sounds.

A weather resistant miniature electret-condenser microphone is supplied which plugs into a panel jack to allow dictation of notes onto the audio track when recording in real time or at certain time lapse intervals. A special internal amplifier is optimized for the voice frequency range but external sources such as parabolic microphones or 9600 baud audio output from a GPS system can also be recorded.

M SERIES

MONITORING SYSTEMS

Various type of integrated portable monitoring systems that incorporate Monitors, camera Drivers and Power supplies allow remote observations in virtually any type of environment including underwater in total darkness. A loopout video jack on the overcase allows a simple camcorder with VTR inputs to record the images if desired. Wireless capability can be incorporated into these systems.

FIELDCAM MDP™ TYPE 1

The FIELDCAM MDP TYPE 1 (Monitor Driver Power Supply) system is an integrated weatherproof cased monitor, remote camera control and rechargeable battery system for various FIELDCAM remote video cameras (including various remote miniature with waterproof housing and Burrow Probe systems). Video output is optionally available to either external recorders / camcorders / monitors or an appropriately sized internal camcorder / recorder. Its choice is especially appropriate when the system is to be moved repeatedly and/or ambient weather conditions preclude the opening of the monitor case when the system is operating. Its cost is substantially less than our fully integrated Fieldcam WCMS systems. Existing MDP systems can be upgraded at reasonable cost to our top of the line WCMS system using each systems existing components.

WEATHERPROOF MDP CASE FEATURES

Case Size is 13 x 10 x 6 in.(33x25x15cm), Weighs 13 lbs.(5.9kg) and Floats When Latched Shut

Mar-Resistant Lexan Faceplate with Molded Polyurethane Frame is Sealed to Case

4 in.(10cm) (Diag.) High Resolution LCD Active Matrix Color Monitor is Mounted Below Faceplate

Waterproof Faceplate Switches for Master Power, Monitor Power and Remote Camera Power

Master Power Switch can Select Internal or External Power

4 to 6 Hour Runtime from Sealed, Maintenance & Memory Free 12 Volt Rechargeable Battery Pack

3 Stage Computer Controller Charger with Charging Status LEDs for Recharging and Continuous 110VAC Use

Waterproof Jack on Case for Waterproof Cable Attachment.

Case Color is either High-Visibility Yellow or Black (please specify)

Case is Fitted with Safety Latches and is Padlockable

Foam Filled Compartment for Appropriate Sized User Supplied Miniature Camcorder or Recorder

ADDITIONAL OPTIONS

Faceplate Mounted Controls for Monitor Brightness and Contrast

Faceplate Mounted Audio Output Headphone Jack and Volume Control from Remote Microphone

Faceplate Mounted Manual Two Camera Switcher for Second Camera Attachment with Waterproof Port

Faceplate Mounted Electronic Dimmer Control to Vary the Intensity of the Infrared LED Illuminator

(Required for Systems Using Burrow Probe Remote Cameras)

Video and/or Audio Output Jacks for External Video Tape Recorder, Camcorder or Monitor

Very High Capacity Internal Battery Pack to Increase Field Run Time of System by 60%

Sun Shield Dark Hood with Velcro Attachment to Allow Viewing of Monitor in Bright Sunlight

High Capacity External Power Cable to Supply 12 VDC for extended run times from your 12 VDC marine battery or solar panel, etc. Cable has an inline o-ring sealed watertight die cast aluminum case containing a converter, reverse polarity protector and self-resetting solid state circuit breakers. Overall cable length is 9ft.(3m). Supplied complete with weatherproof Conxall plug for MDP case end and color coded solid copper battery clamps.

Weatherproof Conxall Jack with Cap to Provide 12VDC Power to External Infrared Array

Optional System Recharger (220 VAC, 50 HZ) with Europlug Cable

Platen Installed Inside of MDP Case for Appropriate Sized Camcorders or Recorders

Video and/or Audio Cable with RCA Plugs Installed Inside of MDP Case for Camcorder / Recorder

FIELDCAM MDP™ TYPE 2

The FIELDCAM MDP TYPE 2 (Monitor Driver Power Supply) system is an ultra compact integrated weatherproof cased monitor, remote camera control and rechargeable battery system for various FIELDCAM remote video cameras (including various remote miniature with waterproof housing and Burrow Probe systems). Video output is optionally available to either external recorders / camcorders / monitors or an appropriately sized internal camcorder / recorder. Its choice is especially appropriate when the system is to be moved repeatedly and/or ambient weather conditions preclude the opening of the monitor case when the system is operating.

WEATHERPROOF MDP CASE FEATURES

Case Size is 7 x 9 x 3.5 in.(19x23x9cm), Weighs 5.6 lbs.(2.5kg) and Floats When Latched Shut

Rigid PVC Monitor Hood is 4 in. (10 cm) high with slide out shield

Mar-Resistant Lexan Faceplate is Sealed to Case

4 in.(10cm) (Diag.) High Resolution LCD Active Matrix Color Monitor is Mounted Below Faceplate

Waterproof Switch for Master Power can Select Internal or External Power.

4 to 6 Hour Runtime from Sealed, Maintenance & Memory Free 12 Volt Rechargeable Battery Pack

3 Stage Computer Controller Charger with Charging Status LEDs for Recharging and Continuous 110VAC Use

Waterproof Jack on Case for Waterproof Cable Attachment.

Case Color is either High-Visibility Yellow or Black (please specify)

Case is Fitted with Safety Latches

ADDITIONAL OPTIONS

Faceplate Mounted Manual Two Camera Switcher for Second Camera Attachment with Waterproof Port

Faceplate Mounted Electronic Dimmer Control to Vary the Intensity of the Infrared LED Illuminator

(Required for Systems Using Burrow Probe Remote Cameras)

High Capacity External Power Cable to Supply 12 VDC for extended run times from your 12 VDC marine battery

FIELDCAM MDP™ TYPE 2R

In addition to the above features, the FIELDCAM TYPE 2R is fitted with an enclosed Reel holding 50 feet of small diameter power and video cable for various remote cameras including the MICROCAM 2S for aerial applications.

The system is completely integrated and sealed in a compact (7 1/2 x 9 x 7 in.(19 X 23 X 18cm)) - weight 8 lb (3.7 kg) weatherproof high impact ABS polymer case that clamps (adjustable position) to a 33 ft. (10 meter) or 50 ft. (15 meter) extension pole.

The video loopout jack (BNC with chained cap- BNC to RCA cable supplied) allows images to be recorded on a camcorder or time lapse recorders. No loose cables protrude from case. Enclosed reel protects camera cable and greatly reduces chance of kinking cable. Run time per recharge approximately 6 hours and usable with external battery packs.

Handle on case allows one handed carry of complete system. System designed for all weather use.

INFORMATION SHEET COMPARING THE MDP TYPE 2R TO OTHER EXTENSION POLE MOUNTED VIDEO MONITORING SYSTEMS

FIELDCAM MDP TYPE 3 has been renamed FIELDCAM WCMS TYPE 10